Rode VideoMic Me-L Directional Microphone for iOS Devices
OVERVIEW
- Plugs Directly into iOS Devices
- Lightning Connect & 3.5mm Headphone Out
- Cardioid Polar Pattern
- 20 Hz to 20 kHz Frequency Response
- 115 dB SPL
- Includes Mic Clip
- Includes Windscreen
- Relatively Lightweight at 1.0 oz
The Rode VideoMic Me-L is a directional microphone designed to operate with iOS devices, including iPhones and iPads. It provides a marked sonic improvement to video recordings, especially when compared to your iOS device's built-in microphone.
A frequency response of 20 Hz to 20 kHz gives you a wide audible range, while an SPL of 115 dB allows you to record louder sounds without distortion. Being cardioid in polar pattern, the microphone exhibits a directionality that focuses the sound wherever you're pointing the device, providing a measure of rejection to any audio hitting the sides of the mic.
Relatively lightweight at 1.0 oz, the mic plugs directly into your iOS device by means of its lightning connector, though a 3.5mm jack is on hand for direct monitoring through headphones. Thus, you can always ensure you're getting good sound, either while recording or during playback. A mic clip is included to secure the mic to your iOS device, and an included furry windshield makes capturing audio in breezy outdoor locales less of a deal breaker.
SPECS
| Acoustic Principle | Pressure-gradient electret condenser |
| Polar Pattern | Cardioid |
| Frequency Range | 20 Hz to 20 kHz |
| Signal to Noise Ratio | 74.5 dB |
| Equivalent Noise | 19.5 dBA SPL (as per IEC651) |
| Maximum SPL | 15 dB SPL (1 kHz at 1 m) |
| Power Requirements | Powered by iOS device, bus-powered |
| Output Connection | Lightning, 3.5 mm TRS |
| Analog Outputs | 3.5 mm TRS headphone jack for direct monitoring |
| Computer Connectivity | Lightning connector |
| I/O | 1 in, 2 out |
| Bit Depth | 24-bit |
| Sample Rates | 44.1 and 48 kHz |
| OS Requirements | iOS 11 and later |
| Material of Construction | Aluminum |
| Dimensions (L x W x H) | 2.9 x 0.8 x 1.0" / 73.5 x 20.2 x 25.7 mm |
| Weight | 1.0 oz / 28.0 g |
| Packaging Info | |
|---|---|
| Package Weight | 0.5 lb |
| Box Dimensions (LxWxH) | 7.1 x 5.0 x 2.7" |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Rode VideoMic Me-L Directional Microphone for iOS Devices
Rode VideoMic Me-L Directional Microphone for iOS Devices
OVERVIEW
- Plugs Directly into iOS Devices
- Lightning Connect & 3.5mm Headphone Out
- Cardioid Polar Pattern
- 20 Hz to 20 kHz Frequency Response
- 115 dB SPL
- Includes Mic Clip
- Includes Windscreen
- Relatively Lightweight at 1.0 oz
The Rode VideoMic Me-L is a directional microphone designed to operate with iOS devices, including iPhones and iPads. It provides a marked sonic improvement to video recordings, especially when compared to your iOS device's built-in microphone.
A frequency response of 20 Hz to 20 kHz gives you a wide audible range, while an SPL of 115 dB allows you to record louder sounds without distortion. Being cardioid in polar pattern, the microphone exhibits a directionality that focuses the sound wherever you're pointing the device, providing a measure of rejection to any audio hitting the sides of the mic.
Relatively lightweight at 1.0 oz, the mic plugs directly into your iOS device by means of its lightning connector, though a 3.5mm jack is on hand for direct monitoring through headphones. Thus, you can always ensure you're getting good sound, either while recording or during playback. A mic clip is included to secure the mic to your iOS device, and an included furry windshield makes capturing audio in breezy outdoor locales less of a deal breaker.
SPECS
| Acoustic Principle | Pressure-gradient electret condenser |
| Polar Pattern | Cardioid |
| Frequency Range | 20 Hz to 20 kHz |
| Signal to Noise Ratio | 74.5 dB |
| Equivalent Noise | 19.5 dBA SPL (as per IEC651) |
| Maximum SPL | 15 dB SPL (1 kHz at 1 m) |
| Power Requirements | Powered by iOS device, bus-powered |
| Output Connection | Lightning, 3.5 mm TRS |
| Analog Outputs | 3.5 mm TRS headphone jack for direct monitoring |
| Computer Connectivity | Lightning connector |
| I/O | 1 in, 2 out |
| Bit Depth | 24-bit |
| Sample Rates | 44.1 and 48 kHz |
| OS Requirements | iOS 11 and later |
| Material of Construction | Aluminum |
| Dimensions (L x W x H) | 2.9 x 0.8 x 1.0" / 73.5 x 20.2 x 25.7 mm |
| Weight | 1.0 oz / 28.0 g |
| Packaging Info | |
|---|---|
| Package Weight | 0.5 lb |
| Box Dimensions (LxWxH) | 7.1 x 5.0 x 2.7" |
Original: $109.00
-65%$109.00
$38.15Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OVERVIEW
- Plugs Directly into iOS Devices
- Lightning Connect & 3.5mm Headphone Out
- Cardioid Polar Pattern
- 20 Hz to 20 kHz Frequency Response
- 115 dB SPL
- Includes Mic Clip
- Includes Windscreen
- Relatively Lightweight at 1.0 oz
The Rode VideoMic Me-L is a directional microphone designed to operate with iOS devices, including iPhones and iPads. It provides a marked sonic improvement to video recordings, especially when compared to your iOS device's built-in microphone.
A frequency response of 20 Hz to 20 kHz gives you a wide audible range, while an SPL of 115 dB allows you to record louder sounds without distortion. Being cardioid in polar pattern, the microphone exhibits a directionality that focuses the sound wherever you're pointing the device, providing a measure of rejection to any audio hitting the sides of the mic.
Relatively lightweight at 1.0 oz, the mic plugs directly into your iOS device by means of its lightning connector, though a 3.5mm jack is on hand for direct monitoring through headphones. Thus, you can always ensure you're getting good sound, either while recording or during playback. A mic clip is included to secure the mic to your iOS device, and an included furry windshield makes capturing audio in breezy outdoor locales less of a deal breaker.
SPECS
| Acoustic Principle | Pressure-gradient electret condenser |
| Polar Pattern | Cardioid |
| Frequency Range | 20 Hz to 20 kHz |
| Signal to Noise Ratio | 74.5 dB |
| Equivalent Noise | 19.5 dBA SPL (as per IEC651) |
| Maximum SPL | 15 dB SPL (1 kHz at 1 m) |
| Power Requirements | Powered by iOS device, bus-powered |
| Output Connection | Lightning, 3.5 mm TRS |
| Analog Outputs | 3.5 mm TRS headphone jack for direct monitoring |
| Computer Connectivity | Lightning connector |
| I/O | 1 in, 2 out |
| Bit Depth | 24-bit |
| Sample Rates | 44.1 and 48 kHz |
| OS Requirements | iOS 11 and later |
| Material of Construction | Aluminum |
| Dimensions (L x W x H) | 2.9 x 0.8 x 1.0" / 73.5 x 20.2 x 25.7 mm |
| Weight | 1.0 oz / 28.0 g |
| Packaging Info | |
|---|---|
| Package Weight | 0.5 lb |
| Box Dimensions (LxWxH) | 7.1 x 5.0 x 2.7" |
